“We had a four-bedroom custom up on Mountain Road, two days from walkthrough. Belleza’s came in, took out the drywall dust I didn’t know was still in the HVAC, and the owners didn’t find a single deficiency.” — T.S., GC.
“Added a new kitchen and primary suite to a 1972 ranch off Day Street. The team handled the haze on the new tile and the dust that had migrated into the older bedrooms during demo.” — homeowner, West Granby.
Our service area in West Granby
We handle post-construction cleaning anywhere in West Granby, including the Highridge cul-de-sacs, Day Street, Simsbury Road (Route 10), Granby Road (Route 20), Mountain Road, and Loomis Street. We also serve neighboring projects in Granby Center, North Granby, East Granby, Simsbury, West Simsbury, and Canton. Crews stage out of Tolland and reach West Granby in about 45 minutes via I-84 west and I-91 north. No travel surcharge.
FAQ — Post-Construction Cleaning in West Granby
When should we schedule the final clean? 24–48 hours before walkthrough is the sweet spot. Earlier and dust resettles; later and you have no buffer for punch items.
Do you remove appliance stickers and protective film? Yes — and we photograph model and serial numbers for the warranty file before peeling.
Can you handle stone tile and marble? Yes — low-acid grout-haze removal, no abrasive pads. Safe for marble thresholds, limestone, and the soft Vermont slate that shows up in West Granby kitchens.
Do you coordinate directly with the GC? Yes. Most of our West Granby work is GC-scheduled, GC-paid, and itemized to the project budget.
What about exterior window overspray? Razor-blade removal of paint, mortar, and stucco, then a streak-free clean. Quoted per pane.
Are you insured for new-construction sites? Yes — $2M general liability, workers’ comp, and additional-insured endorsement available for your GC’s policy on request.
Need post-construction cleaning for a West Granby build or remodel? Call (860) 790-9545 for a pre-clean walkthrough, or send the project details through our contact page. Written, line-itemed quote within 48 hours of the walkthrough.
Rough clean (after framing/MEP). Trash haul-out, sweep, light vacuum. Lets the next trade in without losing screws and offcuts.
Final clean (after punch list). Full top-to-bottom: ceilings vacuumed, light fixtures de-dusted, cabinet interiors hand-wiped, drawer slides cleared, window tracks vacuumed and damp-wiped, appliance stickers removed (we keep model and serial photos for your warranty file), floors swept twice and damp-mopped with surface-appropriate cleaner.
Touch-up / “white-glove” clean. Day before walkthrough. Glass, mirrors, hardware, baseboards, switch plates, register vents.
Stone, tile, and grout treatment. Grout-haze removal on natural stone and porcelain. We use a low-acid product safe for marble thresholds and limestone fireplaces — common in West Granby builds.
Window scrape and clean. Razor-blade removal of paint, mortar, and stucco overspray, then a streak-free interior/exterior clean.
HVAC register and return cleaning. Drywall dust collects behind every grille. We pull them, vacuum the boot, wipe the louvers, reinstall straight.
Garage and basement debris sweep. Sweep, blow, and pick up — drywall scraps, cutoffs, and the obligatory roll of forgotten Tyvek tape.
Project phasing for West Granby builds
We work the way your GC schedules: a rough clean after framing, a deeper interim after trim and paint, and a full final 24–48 hours before the walkthrough. For West Granby projects where the owner is closing on a sale of their old house at the same time, we coordinate a same-week or back-to-back schedule so your client can move directly in. Most of our West Granby final cleans are scheduled the Tuesday or Wednesday before a Friday closing — that gives the GC one full day for any last-minute punch items without compressing our work. Same-day emergency cleans for unexpected walkthrough date moves are usually possible if you call before 10 a.m. — we run a floater crew that can be on site in West Granby in under an hour.
Pricing for West Granby post-construction cleaning
Post-construction in West Granby is quoted by phase and square footage. A typical 2,800 sq ft new colonial runs roughly $1,800–$2,400 for the rough + final combination; a 4,500 sq ft custom build with detached garage and finished basement runs $2,800–$3,900. Additions and gut-remodels are quoted separately and usually land at $0.55–$0.85 per square foot of work area. Stone-tile haze removal is a flat $1.25 per square foot of stone, and exterior window scrapes run $7–$12 per pane depending on overspray. We give the GC a written, line-itemed quote after the pre-clean walkthrough — no per-hour billing surprises.
What West Granby post-construction clients tell us
“We had a four-bedroom custom up on Mountain Road, two days from walkthrough. Belleza’s came in, took out the drywall dust I didn’t know was still in the HVAC, and the owners didn’t find a single deficiency.” — T.S., GC.
“Added a new kitchen and primary suite to a 1972 ranch off Day Street. The team handled the haze on the new tile and the dust that had migrated into the older bedrooms during demo.” — homeowner, West Granby.
Our service area in West Granby
We handle post-construction cleaning anywhere in West Granby, including the Highridge cul-de-sacs, Day Street, Simsbury Road (Route 10), Granby Road (Route 20), Mountain Road, and Loomis Street. We also serve neighboring projects in Granby Center, North Granby, East Granby, Simsbury, West Simsbury, and Canton. Crews stage out of Tolland and reach West Granby in about 45 minutes via I-84 west and I-91 north. No travel surcharge.
FAQ — Post-Construction Cleaning in West Granby
When should we schedule the final clean? 24–48 hours before walkthrough is the sweet spot. Earlier and dust resettles; later and you have no buffer for punch items.
Do you remove appliance stickers and protective film? Yes — and we photograph model and serial numbers for the warranty file before peeling.
Can you handle stone tile and marble? Yes — low-acid grout-haze removal, no abrasive pads. Safe for marble thresholds, limestone, and the soft Vermont slate that shows up in West Granby kitchens.
Do you coordinate directly with the GC? Yes. Most of our West Granby work is GC-scheduled, GC-paid, and itemized to the project budget.
What about exterior window overspray? Razor-blade removal of paint, mortar, and stucco, then a streak-free clean. Quoted per pane.
Are you insured for new-construction sites? Yes — $2M general liability, workers’ comp, and additional-insured endorsement available for your GC’s policy on request.
Need post-construction cleaning for a West Granby build or remodel? Call (860) 790-9545 for a pre-clean walkthrough, or send the project details through our contact page. Written, line-itemed quote within 48 hours of the walkthrough.
Post-Construction Cleaning in West Granby, CT — Belleza’s Home Services
Most of the new construction we clean in West Granby is up the hill — modern colonials on the Highridge ridgeline, custom builds along Day Street, and the steady stream of additions and full gut-remodels in the older homes near Holcomb Farm and the McLean Game Refuge perimeter. Drywall dust travels, and a 4,000 sq ft new build holds about three pounds of it before anyone vacuums. We come up Route 20 from Tolland (roughly 45 minutes), bring our own HEPA equipment, and finish in the phases your builder actually needs.
Why West Granby post-construction cleaning needs a tailored approach
Custom builds in West Granby are not tract homes. They have unfinished basements that became wine cellars, three-season porches with stained tongue-and-groove ceilings, and primary baths with stone tile that grouts in 3/16″ lines instead of 1/8″. Each one of those decisions changes the post-construction punch list. Stone grout holds haze for weeks if the install crew did not seal correctly. Cedar-clad mudrooms need a vacuum-and-wipe approach, not the chemical de-greaser most cleaners reach for. Custom millwork — particularly on the painted-Shaker cabinets we see in this corner of Hartford County — has a finish that dulls under abrasive cleaner. We map all of that on a pre-clean walkthrough with your GC before the first crew shows up, so the second-pass deficiencies list is short.
Post-construction cleaning services we offer in West Granby
Rough clean (after framing/MEP). Trash haul-out, sweep, light vacuum. Lets the next trade in without losing screws and offcuts.
Final clean (after punch list). Full top-to-bottom: ceilings vacuumed, light fixtures de-dusted, cabinet interiors hand-wiped, drawer slides cleared, window tracks vacuumed and damp-wiped, appliance stickers removed (we keep model and serial photos for your warranty file), floors swept twice and damp-mopped with surface-appropriate cleaner.
Touch-up / “white-glove” clean. Day before walkthrough. Glass, mirrors, hardware, baseboards, switch plates, register vents.
Stone, tile, and grout treatment. Grout-haze removal on natural stone and porcelain. We use a low-acid product safe for marble thresholds and limestone fireplaces — common in West Granby builds.
Window scrape and clean. Razor-blade removal of paint, mortar, and stucco overspray, then a streak-free interior/exterior clean.
HVAC register and return cleaning. Drywall dust collects behind every grille. We pull them, vacuum the boot, wipe the louvers, reinstall straight.
Garage and basement debris sweep. Sweep, blow, and pick up — drywall scraps, cutoffs, and the obligatory roll of forgotten Tyvek tape.
Project phasing for West Granby builds
We work the way your GC schedules: a rough clean after framing, a deeper interim after trim and paint, and a full final 24–48 hours before the walkthrough. For West Granby projects where the owner is closing on a sale of their old house at the same time, we coordinate a same-week or back-to-back schedule so your client can move directly in. Most of our West Granby final cleans are scheduled the Tuesday or Wednesday before a Friday closing — that gives the GC one full day for any last-minute punch items without compressing our work. Same-day emergency cleans for unexpected walkthrough date moves are usually possible if you call before 10 a.m. — we run a floater crew that can be on site in West Granby in under an hour.
Pricing for West Granby post-construction cleaning
Post-construction in West Granby is quoted by phase and square footage. A typical 2,800 sq ft new colonial runs roughly $1,800–$2,400 for the rough + final combination; a 4,500 sq ft custom build with detached garage and finished basement runs $2,800–$3,900. Additions and gut-remodels are quoted separately and usually land at $0.55–$0.85 per square foot of work area. Stone-tile haze removal is a flat $1.25 per square foot of stone, and exterior window scrapes run $7–$12 per pane depending on overspray. We give the GC a written, line-itemed quote after the pre-clean walkthrough — no per-hour billing surprises.
What West Granby post-construction clients tell us
“We had a four-bedroom custom up on Mountain Road, two days from walkthrough. Belleza’s came in, took out the drywall dust I didn’t know was still in the HVAC, and the owners didn’t find a single deficiency.” — T.S., GC.
“Added a new kitchen and primary suite to a 1972 ranch off Day Street. The team handled the haze on the new tile and the dust that had migrated into the older bedrooms during demo.” — homeowner, West Granby.
Our service area in West Granby
We handle post-construction cleaning anywhere in West Granby, including the Highridge cul-de-sacs, Day Street, Simsbury Road (Route 10), Granby Road (Route 20), Mountain Road, and Loomis Street. We also serve neighboring projects in Granby Center, North Granby, East Granby, Simsbury, West Simsbury, and Canton. Crews stage out of Tolland and reach West Granby in about 45 minutes via I-84 west and I-91 north. No travel surcharge.
FAQ — Post-Construction Cleaning in West Granby
When should we schedule the final clean? 24–48 hours before walkthrough is the sweet spot. Earlier and dust resettles; later and you have no buffer for punch items.
Do you remove appliance stickers and protective film? Yes — and we photograph model and serial numbers for the warranty file before peeling.
Can you handle stone tile and marble? Yes — low-acid grout-haze removal, no abrasive pads. Safe for marble thresholds, limestone, and the soft Vermont slate that shows up in West Granby kitchens.
Do you coordinate directly with the GC? Yes. Most of our West Granby work is GC-scheduled, GC-paid, and itemized to the project budget.
What about exterior window overspray? Razor-blade removal of paint, mortar, and stucco, then a streak-free clean. Quoted per pane.
Are you insured for new-construction sites? Yes — $2M general liability, workers’ comp, and additional-insured endorsement available for your GC’s policy on request.
Need post-construction cleaning for a West Granby build or remodel? Call (860) 790-9545 for a pre-clean walkthrough, or send the project details through our contact page. Written, line-itemed quote within 48 hours of the walkthrough.
Rough clean (after framing/MEP). Trash haul-out, sweep, light vacuum. Lets the next trade in without losing screws and offcuts.
Final clean (after punch list). Full top-to-bottom: ceilings vacuumed, light fixtures de-dusted, cabinet interiors hand-wiped, drawer slides cleared, window tracks vacuumed and damp-wiped, appliance stickers removed (we keep model and serial photos for your warranty file), floors swept twice and damp-mopped with surface-appropriate cleaner.
Touch-up / “white-glove” clean. Day before walkthrough. Glass, mirrors, hardware, baseboards, switch plates, register vents.
Stone, tile, and grout treatment. Grout-haze removal on natural stone and porcelain. We use a low-acid product safe for marble thresholds and limestone fireplaces — common in West Granby builds.
Window scrape and clean. Razor-blade removal of paint, mortar, and stucco overspray, then a streak-free interior/exterior clean.
HVAC register and return cleaning. Drywall dust collects behind every grille. We pull them, vacuum the boot, wipe the louvers, reinstall straight.
Garage and basement debris sweep. Sweep, blow, and pick up — drywall scraps, cutoffs, and the obligatory roll of forgotten Tyvek tape.
Project phasing for West Granby builds
We work the way your GC schedules: a rough clean after framing, a deeper interim after trim and paint, and a full final 24–48 hours before the walkthrough. For West Granby projects where the owner is closing on a sale of their old house at the same time, we coordinate a same-week or back-to-back schedule so your client can move directly in. Most of our West Granby final cleans are scheduled the Tuesday or Wednesday before a Friday closing — that gives the GC one full day for any last-minute punch items without compressing our work. Same-day emergency cleans for unexpected walkthrough date moves are usually possible if you call before 10 a.m. — we run a floater crew that can be on site in West Granby in under an hour.
Pricing for West Granby post-construction cleaning
Post-construction in West Granby is quoted by phase and square footage. A typical 2,800 sq ft new colonial runs roughly $1,800–$2,400 for the rough + final combination; a 4,500 sq ft custom build with detached garage and finished basement runs $2,800–$3,900. Additions and gut-remodels are quoted separately and usually land at $0.55–$0.85 per square foot of work area. Stone-tile haze removal is a flat $1.25 per square foot of stone, and exterior window scrapes run $7–$12 per pane depending on overspray. We give the GC a written, line-itemed quote after the pre-clean walkthrough — no per-hour billing surprises.
What West Granby post-construction clients tell us
“We had a four-bedroom custom up on Mountain Road, two days from walkthrough. Belleza’s came in, took out the drywall dust I didn’t know was still in the HVAC, and the owners didn’t find a single deficiency.” — T.S., GC.
“Added a new kitchen and primary suite to a 1972 ranch off Day Street. The team handled the haze on the new tile and the dust that had migrated into the older bedrooms during demo.” — homeowner, West Granby.
Our service area in West Granby
We handle post-construction cleaning anywhere in West Granby, including the Highridge cul-de-sacs, Day Street, Simsbury Road (Route 10), Granby Road (Route 20), Mountain Road, and Loomis Street. We also serve neighboring projects in Granby Center, North Granby, East Granby, Simsbury, West Simsbury, and Canton. Crews stage out of Tolland and reach West Granby in about 45 minutes via I-84 west and I-91 north. No travel surcharge.
FAQ — Post-Construction Cleaning in West Granby
When should we schedule the final clean? 24–48 hours before walkthrough is the sweet spot. Earlier and dust resettles; later and you have no buffer for punch items.
Do you remove appliance stickers and protective film? Yes — and we photograph model and serial numbers for the warranty file before peeling.
Can you handle stone tile and marble? Yes — low-acid grout-haze removal, no abrasive pads. Safe for marble thresholds, limestone, and the soft Vermont slate that shows up in West Granby kitchens.
Do you coordinate directly with the GC? Yes. Most of our West Granby work is GC-scheduled, GC-paid, and itemized to the project budget.
What about exterior window overspray? Razor-blade removal of paint, mortar, and stucco, then a streak-free clean. Quoted per pane.
Are you insured for new-construction sites? Yes — $2M general liability, workers’ comp, and additional-insured endorsement available for your GC’s policy on request.
Need post-construction cleaning for a West Granby build or remodel? Call (860) 790-9545 for a pre-clean walkthrough, or send the project details through our contact page. Written, line-itemed quote within 48 hours of the walkthrough.
Post-Construction Cleaning in West Granby, CT — Belleza’s Home Services
Most of the new construction we clean in West Granby is up the hill — modern colonials on the Highridge ridgeline, custom builds along Day Street, and the steady stream of additions and full gut-remodels in the older homes near Holcomb Farm and the McLean Game Refuge perimeter. Drywall dust travels, and a 4,000 sq ft new build holds about three pounds of it before anyone vacuums. We come up Route 20 from Tolland (roughly 45 minutes), bring our own HEPA equipment, and finish in the phases your builder actually needs.
Why West Granby post-construction cleaning needs a tailored approach
Custom builds in West Granby are not tract homes. They have unfinished basements that became wine cellars, three-season porches with stained tongue-and-groove ceilings, and primary baths with stone tile that grouts in 3/16″ lines instead of 1/8″. Each one of those decisions changes the post-construction punch list. Stone grout holds haze for weeks if the install crew did not seal correctly. Cedar-clad mudrooms need a vacuum-and-wipe approach, not the chemical de-greaser most cleaners reach for. Custom millwork — particularly on the painted-Shaker cabinets we see in this corner of Hartford County — has a finish that dulls under abrasive cleaner. We map all of that on a pre-clean walkthrough with your GC before the first crew shows up, so the second-pass deficiencies list is short.
Post-construction cleaning services we offer in West Granby
Rough clean (after framing/MEP). Trash haul-out, sweep, light vacuum. Lets the next trade in without losing screws and offcuts.
Final clean (after punch list). Full top-to-bottom: ceilings vacuumed, light fixtures de-dusted, cabinet interiors hand-wiped, drawer slides cleared, window tracks vacuumed and damp-wiped, appliance stickers removed (we keep model and serial photos for your warranty file), floors swept twice and damp-mopped with surface-appropriate cleaner.
Touch-up / “white-glove” clean. Day before walkthrough. Glass, mirrors, hardware, baseboards, switch plates, register vents.
Stone, tile, and grout treatment. Grout-haze removal on natural stone and porcelain. We use a low-acid product safe for marble thresholds and limestone fireplaces — common in West Granby builds.
Window scrape and clean. Razor-blade removal of paint, mortar, and stucco overspray, then a streak-free interior/exterior clean.
HVAC register and return cleaning. Drywall dust collects behind every grille. We pull them, vacuum the boot, wipe the louvers, reinstall straight.
Garage and basement debris sweep. Sweep, blow, and pick up — drywall scraps, cutoffs, and the obligatory roll of forgotten Tyvek tape.
Project phasing for West Granby builds
We work the way your GC schedules: a rough clean after framing, a deeper interim after trim and paint, and a full final 24–48 hours before the walkthrough. For West Granby projects where the owner is closing on a sale of their old house at the same time, we coordinate a same-week or back-to-back schedule so your client can move directly in. Most of our West Granby final cleans are scheduled the Tuesday or Wednesday before a Friday closing — that gives the GC one full day for any last-minute punch items without compressing our work. Same-day emergency cleans for unexpected walkthrough date moves are usually possible if you call before 10 a.m. — we run a floater crew that can be on site in West Granby in under an hour.
Pricing for West Granby post-construction cleaning
Post-construction in West Granby is quoted by phase and square footage. A typical 2,800 sq ft new colonial runs roughly $1,800–$2,400 for the rough + final combination; a 4,500 sq ft custom build with detached garage and finished basement runs $2,800–$3,900. Additions and gut-remodels are quoted separately and usually land at $0.55–$0.85 per square foot of work area. Stone-tile haze removal is a flat $1.25 per square foot of stone, and exterior window scrapes run $7–$12 per pane depending on overspray. We give the GC a written, line-itemed quote after the pre-clean walkthrough — no per-hour billing surprises.
What West Granby post-construction clients tell us
“We had a four-bedroom custom up on Mountain Road, two days from walkthrough. Belleza’s came in, took out the drywall dust I didn’t know was still in the HVAC, and the owners didn’t find a single deficiency.” — T.S., GC.
“Added a new kitchen and primary suite to a 1972 ranch off Day Street. The team handled the haze on the new tile and the dust that had migrated into the older bedrooms during demo.” — homeowner, West Granby.
Our service area in West Granby
We handle post-construction cleaning anywhere in West Granby, including the Highridge cul-de-sacs, Day Street, Simsbury Road (Route 10), Granby Road (Route 20), Mountain Road, and Loomis Street. We also serve neighboring projects in Granby Center, North Granby, East Granby, Simsbury, West Simsbury, and Canton. Crews stage out of Tolland and reach West Granby in about 45 minutes via I-84 west and I-91 north. No travel surcharge.
FAQ — Post-Construction Cleaning in West Granby
When should we schedule the final clean? 24–48 hours before walkthrough is the sweet spot. Earlier and dust resettles; later and you have no buffer for punch items.
Do you remove appliance stickers and protective film? Yes — and we photograph model and serial numbers for the warranty file before peeling.
Can you handle stone tile and marble? Yes — low-acid grout-haze removal, no abrasive pads. Safe for marble thresholds, limestone, and the soft Vermont slate that shows up in West Granby kitchens.
Do you coordinate directly with the GC? Yes. Most of our West Granby work is GC-scheduled, GC-paid, and itemized to the project budget.
What about exterior window overspray? Razor-blade removal of paint, mortar, and stucco, then a streak-free clean. Quoted per pane.
Are you insured for new-construction sites? Yes — $2M general liability, workers’ comp, and additional-insured endorsement available for your GC’s policy on request.
Need post-construction cleaning for a West Granby build or remodel? Call (860) 790-9545 for a pre-clean walkthrough, or send the project details through our contact page. Written, line-itemed quote within 48 hours of the walkthrough.
